Profile configuration
[Connection Manager]

Detailed Description

Informations for building or reading network profiles.

Plugins list

#define ALP_CNC_BLUETOOTH_IN_PLUGIN_NAME   "BluetoothIn"

Bluetooth Cnc plugin for input connections.

#define ALP_CNC_BLUETOOTH_PLUGIN_NAME   "BluetoothOut"

Bluetooth Cnc plugin: Manage Bluetooth devices.

#define ALP_CNC_BLUETOOTH_SERIAL_PLUGIN_NAME   "BluetoothSPP"

Bluetooth Cnc plugin: Manage Bluetooth Serial devices.

#define ALP_CNC_DATA_CALL_PLUGIN_NAME   "DataCall"

Data Call Cnc plugin: Manage data connection with Phone devices.

#define ALP_CNC_ETHERNET_PLUGIN_NAME   "Ethernet"

Ethernet Cnc plugin: Manage Ethernet devices.

#define ALP_CNC_IPIF_IN_PLUGIN_NAME   "IPIFIN"

IPIFIN plug-in: manage IP incoming connections.

#define ALP_CNC_IPIF_PLUGIN_NAME   "IPIF"

IPIF Cnc plugin: Manage network configuration (IP interfaces).

#define ALP_CNC_IPSEC_PLUGIN_NAME   "IPSEC"

IPSEC Cnc plugin: Manage IPSEC connections.

#define ALP_CNC_L2TP_PLUGIN_NAME   "L2TP"

L2TP Cnc plugin: Manage L2TP connections.

#define ALP_CNC_NET_ACCESS_PLUGIN_NAME   "NetAccess"

Net Access plug-in:.

#define ALP_CNC_NET_IN_INTERFACE   "NetIn"

Anchor for NetIn profiles.

#define ALP_CNC_NET_OUT_INTERFACE   "NetOut"

The various "anchoring points" in the networking Cnc graph.

#define ALP_CNC_NET_OUTGOING_SEARCH_STRING   ALP_CNC_NET_OUT_INTERFACE"/*"

Netout search string.

#define ALP_CNC_NET_PEER_PLUGIN_NAME   "NetPeer"

NetPeer plug-in: manage connections over NetIn profiles.

#define ALP_CNC_NO_IPV6_OBJECT   "NoIPv6"

IPv6 object.

#define ALP_CNC_OMAP_CSMI_PLUGIN_NAME   "OmapCsmi"

OMAP CSMI Cnc plugin: Manage data connection with Phone devices.

#define ALP_CNC_PHONE_PLUGIN_NAME   "Phone"

Phone Cnc plugin: Manage connection with Phone devices.

#define ALP_CNC_PPP_PLUGIN_NAME   "PPP"

PPP Cnc plugin: Manage PPP connections.

#define ALP_CNC_SERIAL_PLUGIN_NAME   "Serial"

PPP Cnc plugin: Manage Serial devices.

#define ALP_CNC_TUN_IP_PLUGIN_NAME   "TunIP"

Tunnel IP plug-in: Manage IP tunneling like IPv6-in-IPv4.

#define ALP_CNC_VP_TCP_PLUGIN_NAME   "VP_TCP"

VP_TCP plugin: Manage TCP connection with VirtualPhone.

#define ALP_CNC_VPN_PLUGIN_NAME   "VPN"

IPSEC Cnc plugin: Manage VPN connections.

#define ALP_CNC_WIFI_NETWORKS_NAME   "NetWifi"

Anchor for Wifi cached networks.

#define ALP_CNC_WIFI_PLUGIN_NAME   "Wifi"

WIFI Cnc plugin: Manage wifi devices.

Parameters list

#define ALP_CNC_DEFAULT_DISCONNECTION_TIMEMOUT   ((time_t) 600)

Default disconnection timeout value.

#define ALP_CNC_PARAMETER_AGGRESSIVE_MODE   'Aggr'

Aggresive mode for IPSEC.

#define ALP_CNC_PARAMETER_APPLICATION_DISCONNECTION_TIMEMOUT   'ADsT'

Application Disconnection timeout in seconds (used when an app disconnects with the ALP_CNC_DISCONNECT_WITH_TIMEOUT flag).

#define ALP_CNC_PARAMETER_ASSOCIATED_PROFILE   'APro'

Associated NetPeer profile with a NetIn profile.

#define ALP_CNC_PARAMETER_AUTHENTIFICATION_MODE   'Auth'

Authentication mode: PAP, CHAP,...

#define ALP_CNC_PARAMETER_AUTO_PROFILE   'auto'

Set to 0 to avoid auto connection/disconnection feature on the profile.

#define ALP_CNC_PARAMETER_BAUD_RATE   'Baud'

Speed on serial device.

#define ALP_CNC_PARAMETER_BINDED_NETWORKS   'BNts'

Networks binded to the profile.

#define ALP_CNC_PARAMETER_BLUETOOTH_ADDRESS   'Addr'

Bluetooth address of the remote device to connection.

#define ALP_CNC_PARAMETER_BOUND_PROFILE   'CPro'

Profilename of the bound profile with the connection profile (ie VPN).

#define ALP_CNC_PARAMETER_CHECK_CABLE   'Cabl'

1 to check, 0 to not check if the cable is present

#define ALP_CNC_PARAMETER_CISCO_COMPATIBILITY_MODE   'CisM'

CISCO Compatibility Mode.

#define ALP_CNC_PARAMETER_CNC_PURPOSE   'CncP'

Phone Plugin: Connection purpose: Server or Transport.

#define ALP_CNC_PARAMETER_CNC_TYPE   'CncT'

Phone Plugin: Connection type we want to open: AT command, CSD data call...

#define ALP_CNC_PARAMETER_CONFIGURATION_MODE   'Mode'

DHCP, Static, Zero Conf...

#define ALP_CNC_PARAMETER_CONNECTION_DELAY   'Dlay'

Time to wait before continuing connection process (in second).

#define ALP_CNC_PARAMETER_CONNECTION_MODE   'CMod'

Connection Mode for NetAcces.

#define ALP_CNC_PARAMETER_CONNECTION_PEER   'CoPe'

0 to not allowed NetOut profile over this NetIn profile, 1 for yes

#define ALP_CNC_PARAMETER_CONNECTION_SHARING   'CoSh'

0 to not share a connection within the NetIn profile, 1 for yes

#define ALP_CNC_PARAMETER_CONNECTION_TIMEOUT   'ConT'

Time allowed for connection.

#define ALP_CNC_PARAMETER_DATA_BITS   'Bits'

Data bits on device.

#define ALP_CNC_PARAMETER_DATA_CALL_CS_BEARER_CNC_ELEM   'BCEl'

Data Call Plugin: CS bearer cnc element.

#define ALP_CNC_PARAMETER_DATA_CALL_CS_BEARER_SERVICE   'BSrv'

Data Call Plugin: CS bearer service.

#define ALP_CNC_PARAMETER_DATA_CALL_CS_BEARER_SPEED   'BSpd'

Data Call Plugin: CS bearer speed.

#define ALP_CNC_PARAMETER_DATA_CALL_CS_DIAL_NUMBER   'Dial'

Data Call Plugin: CS Dial number.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_APN   'Apna'

Data Call Plugin: PS access point name.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_DATA_COMP   'Datc'

Data Call Plugin: PS data compression.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_HEADER_COMP   'Hdrc'

Data Call Plugin: PS header compression.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_DELAY   'Dela'

Data Call Plugin: PS QOS delay.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_GTED_BITRATE_DL   'Gbrd'

Data Call Plugin: PS QOS guaranted download bitrate.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_GTED_BITRATE_UL   'Gbru'

Data Call Plugin: PS QOS guaranted upload bitrate.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_MAX_BITRATE_DL   'Mbrd'

Data Call Plugin: PS QOS max download bitrate.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_MAX_BITRATE_UL   'Mbru'

Data Call Plugin: PS QOS max upload bitrate.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_MEAN   'Mean'

Data Call Plugin: PS QOS mean.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_PEAK   'Peak'

Data Call Plugin: PS QOS peak.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_PRECEDENCE   'Prec'

Data Call Plugin: PS QOS precedence.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_RELIABILITY   'Reli'

Data Call Plugin: PS QOS reliability.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_TRAFFIC_CLASS   'Trcl'

Data Call Plugin: PS QOS traffic class.

#define ALP_CNC_PARAMETER_DATA_CALL_TYPE   'Type'

Data Call Plugin: Type of data call: CS or PS.

#define ALP_CNC_PARAMETER_DEVICE_NAME   'DevN'

Device name.

#define ALP_CNC_PARAMETER_DHCP_CLIENT_ID   'DHcl'

Client ID for the DHCP server.

#define ALP_CNC_PARAMETER_DHCP_HOST_NAME   'DHhn'

Host name for the DHCP server.

#define ALP_CNC_PARAMETER_DHCP_POOL_SIZE   'PSiz'

If DHCP=1, define the size of the address pool used by the DHCP server (default 16).

#define ALP_CNC_PARAMETER_DISCONNECTION_TIMEMOUT   'DisT'

Default Disconnection timeout in seconds.

#define ALP_CNC_PARAMETER_DNS_SERVERS   'DNSs'

DNS servers.

#define ALP_CNC_PARAMETER_DOMAINS   'Doms'

Bind search domain names.

#define ALP_CNC_PARAMETER_ENABLE_DHCP   'DHCP'

IPIFIN parameter: Enable DHCP (default) or use ZeroConf (zcip).

#define ALP_CNC_PARAMETER_ENCRYPTION_MODE   'EMod'

Encryption mode for the connection (specific use for VPN).

#define ALP_CNC_PARAMETER_EXTRA_OPTIONS   'XOpt'

Extra options for the plugin.

#define ALP_CNC_PARAMETER_FLOW_CONTROL   'FCtl'

Flow control on device.

#define ALP_CNC_PARAMETER_GATEWAY   'GaWy'

Gateway.

#define ALP_CNC_PARAMETER_GROUP_NAME   'GrpN'

CISCO Goup Name for pre-shared key.

#define ALP_CNC_PARAMETER_HCI_DEVICE   '_Hci'

Used when the device has more than one BT device. In that case this parameter is used to define the BT device to use for the connection.

#define ALP_CNC_PARAMETER_HEX_PRESHARED_KEY   'HexK'

Is the preshared key in a hexadecimal format ?

#define ALP_CNC_PARAMETER_IDLE_TIMEOUT   'IdlT'

Time to wait before deconnecting when idle.

#define ALP_CNC_PARAMETER_INTERFACE_NAME   'DDev'

IF name.

#define ALP_CNC_PARAMETER_IP_FAMILY   'IPvs'

IPv4 or IPv6.

#define ALP_CNC_PARAMETER_IP_PROTOCOL   'Prot'

A protocol (ie TCP, UDP, ICMP...).

#define ALP_CNC_PARAMETER_LINK   'link'

link parameter (see ALP_CNC_CHANNEL_LINK_XXX constants)

#define ALP_CNC_PARAMETER_LINKED_PROFILE   'LPro'

The openned channel on the NetPeer profile.

#define ALP_CNC_PARAMETER_LLMNR   'LMNR'

To activate or desactivate LLMNR for the profile.

#define ALP_CNC_PARAMETER_LOCAL_IP   'LoIP'

local IP address

#define ALP_CNC_PARAMETER_LOCAL_IP_ADDRESSES   'LIPs'

List of IPv6 addresses to assign.

#define ALP_CNC_PARAMETER_METRIC   'Mtic'

IF metric.

#define ALP_CNC_PARAMETER_MTU   '_MTU'

IF MTU.

#define ALP_CNC_PARAMETER_NO_DEFAULT_PPPD_ARGS   'NDPA'

0 for use the default arguments to start pppd, 1 for not

#define ALP_CNC_PARAMETER_NO_VPN_AUTH   'NoVA'

Are the username and the password managed by a lower plug-in instead of the VPN plug-in ?

#define ALP_CNC_PARAMETER_PARITY_BITS   'Prty'

Parity bits on device.

#define ALP_CNC_PARAMETER_PASSWORD   'Pass'

Password for authentification.

#define ALP_CNC_PARAMETER_PFS_MODE   'PFSe'

Perfect Forwarding Secrecy for IPSEC.

#define ALP_CNC_PARAMETER_PHONE_DRIVER   'PDrv'

Phone Plugin: Phone Driver parameter.

#define ALP_CNC_PARAMETER_PORT   'Port'

A port (ie for TCP, UDP).

#define ALP_CNC_PARAMETER_PPP_AUTHENTICATION_UI   'PAUI'

Is the authentication UI part of the PPP plug-in must be displayed ? (default: 0=no).

#define ALP_CNC_PARAMETER_PPP_DATA_COMP   'Datc'

PPP Plugin: Software compression (default: 1=on).

#define ALP_CNC_PARAMETER_PPP_HEADER_COMP   'Hdrc'

PPP Plugin: IP Header compression (default: 1=on).

#define ALP_CNC_PARAMETER_PRESHARED_KEY   'PShK'

Pre-shared key to use for connection (ie VPN).

#define ALP_CNC_PARAMETER_PXLOGICAL_AUTH_ID   'PAId'

Logical authentication Id.

#define ALP_CNC_PARAMETER_PXLOGICAL_AUTH_PW   'PAPw'

Logical authentication password.

#define ALP_CNC_PARAMETER_PXLOGICAL_AUTH_TYPE   'PAut'

Logical proxy authentication type.

#define ALP_CNC_PARAMETER_PXLOGICAL_NAME   'PNam'

Logical proxy name.

#define ALP_CNC_PARAMETER_PXLOGICAL_NO_PROXY_FOR   'PNoP'

No Proxy for field.

#define ALP_CNC_PARAMETER_PXLOGICAL_START_PAGE   'PPag'

Logical proxy start page.

#define ALP_CNC_PARAMETER_PXPHYSICAL_ADDRESS   'PAdr'

Physical proxy address.

#define ALP_CNC_PARAMETER_PXPHYSICAL_ADDRESS_TYPE   'PAdt'

Physical proxy address type.

#define ALP_CNC_PARAMETER_PXPHYSICAL_PORT   'PPrt'

Physical proxy port number.

#define ALP_CNC_PARAMETER_REMOTE_HOST   'ReHt'

Remote Host domain name or IP address(ie the VPN server).

#define ALP_CNC_PARAMETER_REMOTE_IP   'ReIP'

remote IP address for point-to-point links

#define ALP_CNC_PARAMETER_SCRIPT_FILE   'LogF'

File path of the login script.

#define ALP_CNC_PARAMETER_SECURITY   '_Sec'

Security parameter for Bluetooth connection. (0 = none, 1 = authenticate, 2 = encrypt, 3 = secure).

#define ALP_CNC_PARAMETER_SERVICE   'srv0'

service parameter (see ALP_CNC_CHANNEL_SRV_XXX constants)

#define ALP_CNC_PARAMETER_SERVICE_NAME   'Topo'

Topology of the bluetooth network i.e. PANU, GN or NAP.

#define ALP_CNC_PARAMETER_SERVICE_REQUESTED   'srvR'

service requested parameter (see ALP_CNC_CHANNEL_SRV_XXX constants)

#define ALP_CNC_PARAMETER_STOP_BITS   'Stop'

Stop bits on device.

#define ALP_CNC_PARAMETER_TTL   '_TTL'

TTL for tunneling.

#define ALP_CNC_PARAMETER_TUNNEL_PROFILE   'TPro'

ID of the profile that uses the connection profile to open a tunnel.

#define ALP_CNC_PARAMETER_UI_LOCKED   'Lock'

Is the plug-in UI is unable to edit when editing a profile with the plug-in ?

#define ALP_CNC_PARAMETER_UI_VISIBLE   'UIVi'

Is the plug-in UI is visible when editing a profile with the plug-in ?

#define ALP_CNC_PARAMETER_UNIQUE_SLAVE_IP   'USIP'

for NetIn profiles when PSiz=1, the unique possible IP for the slave device connected

#define ALP_CNC_PARAMETER_USED_PROFILE   'UPro'

ID of the used profile with the connection profile (ie VPN).

#define ALP_CNC_PARAMETER_USER_NAME   'User'

Username for authentification.

#define ALP_CNC_PARAMETER_WIFI_ADDRESS   'Addr'

WiFi: MAC address of the remote access point.

#define ALP_CNC_PARAMETER_WIFI_ENCRYPTION   'WEnc'

WiFi: see ALP_WIFI_SECURITY_MODE_XXX.

#define ALP_CNC_PARAMETER_WIFI_ESSID   'Ssid'

WiFi: ESSID of the network.

#define ALP_CNC_PARAMETER_WIFI_LAST_CONNECTION   'Last'

WiFi: Last connection of the network.

#define ALP_CNC_PARAMETER_WIFI_NETWORK_ID   'NWID'

WiFi: ID of the connected favorite network.

#define ALP_CNC_PARAMETER_WIFI_RADIO_MODE   'Rdio'

WiFi: Radio mode: Infrastructure, Ad-Hoc, Hidden...

#define ALP_CNC_PARAMETER_X509_CERTIFICATE   'Cert'

ID of the X509 certificate to use for the connection (ie VPN).

Define Documentation

#define ALP_CNC_BLUETOOTH_IN_PLUGIN_NAME "BluetoothIn"

Bluetooth Cnc plugin for input connections.

#define ALP_CNC_BLUETOOTH_PLUGIN_NAME "BluetoothOut"

Bluetooth Cnc plugin: Manage Bluetooth devices.

#define ALP_CNC_BLUETOOTH_SERIAL_PLUGIN_NAME "BluetoothSPP"

Bluetooth Cnc plugin: Manage Bluetooth Serial devices.

#define ALP_CNC_DATA_CALL_PLUGIN_NAME "DataCall"

Data Call Cnc plugin: Manage data connection with Phone devices.

#define ALP_CNC_DEFAULT_DISCONNECTION_TIMEMOUT ((time_t) 600)

Default disconnection timeout value.

#define ALP_CNC_ETHERNET_PLUGIN_NAME "Ethernet"

Ethernet Cnc plugin: Manage Ethernet devices.

#define ALP_CNC_IPIF_IN_PLUGIN_NAME "IPIFIN"

IPIFIN plug-in: manage IP incoming connections.

#define ALP_CNC_IPIF_PLUGIN_NAME "IPIF"

IPIF Cnc plugin: Manage network configuration (IP interfaces).

#define ALP_CNC_IPSEC_PLUGIN_NAME "IPSEC"

IPSEC Cnc plugin: Manage IPSEC connections.

#define ALP_CNC_L2TP_PLUGIN_NAME "L2TP"

L2TP Cnc plugin: Manage L2TP connections.

#define ALP_CNC_NET_ACCESS_PLUGIN_NAME "NetAccess"

Net Access plug-in:.

#define ALP_CNC_NET_IN_INTERFACE "NetIn"

Anchor for NetIn profiles.

#define ALP_CNC_NET_OUT_INTERFACE "NetOut"

The various "anchoring points" in the networking Cnc graph.

#define ALP_CNC_NET_OUTGOING_SEARCH_STRING ALP_CNC_NET_OUT_INTERFACE"/*"

Netout search string.

#define ALP_CNC_NET_PEER_PLUGIN_NAME "NetPeer"

NetPeer plug-in: manage connections over NetIn profiles.

#define ALP_CNC_NO_IPV6_OBJECT "NoIPv6"

IPv6 object.

#define ALP_CNC_OMAP_CSMI_PLUGIN_NAME "OmapCsmi"

OMAP CSMI Cnc plugin: Manage data connection with Phone devices.

#define ALP_CNC_PARAMETER_AGGRESSIVE_MODE 'Aggr'

Aggresive mode for IPSEC.

#define ALP_CNC_PARAMETER_APPLICATION_DISCONNECTION_TIMEMOUT 'ADsT'

Application Disconnection timeout in seconds (used when an app disconnects with the ALP_CNC_DISCONNECT_WITH_TIMEOUT flag).

#define ALP_CNC_PARAMETER_ASSOCIATED_PROFILE 'APro'

Associated NetPeer profile with a NetIn profile.

#define ALP_CNC_PARAMETER_AUTHENTIFICATION_MODE 'Auth'

Authentication mode: PAP, CHAP,...

#define ALP_CNC_PARAMETER_AUTO_PROFILE 'auto'

Set to 0 to avoid auto connection/disconnection feature on the profile.

#define ALP_CNC_PARAMETER_BAUD_RATE 'Baud'

Speed on serial device.

#define ALP_CNC_PARAMETER_BINDED_NETWORKS 'BNts'

Networks binded to the profile.

#define ALP_CNC_PARAMETER_BLUETOOTH_ADDRESS 'Addr'

Bluetooth address of the remote device to connection.

#define ALP_CNC_PARAMETER_BOUND_PROFILE 'CPro'

Profilename of the bound profile with the connection profile (ie VPN).

#define ALP_CNC_PARAMETER_CHECK_CABLE 'Cabl'

1 to check, 0 to not check if the cable is present

#define ALP_CNC_PARAMETER_CISCO_COMPATIBILITY_MODE 'CisM'

CISCO Compatibility Mode.

#define ALP_CNC_PARAMETER_CNC_PURPOSE 'CncP'

Phone Plugin: Connection purpose: Server or Transport.

#define ALP_CNC_PARAMETER_CNC_TYPE 'CncT'

Phone Plugin: Connection type we want to open: AT command, CSD data call...

#define ALP_CNC_PARAMETER_CONFIGURATION_MODE 'Mode'

DHCP, Static, Zero Conf...

#define ALP_CNC_PARAMETER_CONNECTION_DELAY 'Dlay'

Time to wait before continuing connection process (in second).

#define ALP_CNC_PARAMETER_CONNECTION_MODE 'CMod'

Connection Mode for NetAcces.

#define ALP_CNC_PARAMETER_CONNECTION_PEER 'CoPe'

0 to not allowed NetOut profile over this NetIn profile, 1 for yes

#define ALP_CNC_PARAMETER_CONNECTION_SHARING 'CoSh'

0 to not share a connection within the NetIn profile, 1 for yes

#define ALP_CNC_PARAMETER_CONNECTION_TIMEOUT 'ConT'

Time allowed for connection.

#define ALP_CNC_PARAMETER_DATA_BITS 'Bits'

Data bits on device.

#define ALP_CNC_PARAMETER_DATA_CALL_CS_BEARER_CNC_ELEM 'BCEl'

Data Call Plugin: CS bearer cnc element.

#define ALP_CNC_PARAMETER_DATA_CALL_CS_BEARER_SERVICE 'BSrv'

Data Call Plugin: CS bearer service.

#define ALP_CNC_PARAMETER_DATA_CALL_CS_BEARER_SPEED 'BSpd'

Data Call Plugin: CS bearer speed.

#define ALP_CNC_PARAMETER_DATA_CALL_CS_DIAL_NUMBER 'Dial'

Data Call Plugin: CS Dial number.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_APN 'Apna'

Data Call Plugin: PS access point name.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_DATA_COMP 'Datc'

Data Call Plugin: PS data compression.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_HEADER_COMP 'Hdrc'

Data Call Plugin: PS header compression.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_DELAY 'Dela'

Data Call Plugin: PS QOS delay.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_GTED_BITRATE_DL 'Gbrd'

Data Call Plugin: PS QOS guaranted download bitrate.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_GTED_BITRATE_UL 'Gbru'

Data Call Plugin: PS QOS guaranted upload bitrate.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_MAX_BITRATE_DL 'Mbrd'

Data Call Plugin: PS QOS max download bitrate.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_MAX_BITRATE_UL 'Mbru'

Data Call Plugin: PS QOS max upload bitrate.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_MEAN 'Mean'

Data Call Plugin: PS QOS mean.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_PEAK 'Peak'

Data Call Plugin: PS QOS peak.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_PRECEDENCE 'Prec'

Data Call Plugin: PS QOS precedence.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_RELIABILITY 'Reli'

Data Call Plugin: PS QOS reliability.

#define ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_TRAFFIC_CLASS 'Trcl'

Data Call Plugin: PS QOS traffic class.

#define ALP_CNC_PARAMETER_DATA_CALL_TYPE 'Type'

Data Call Plugin: Type of data call: CS or PS.

#define ALP_CNC_PARAMETER_DEVICE_NAME 'DevN'

Device name.

#define ALP_CNC_PARAMETER_DHCP_CLIENT_ID 'DHcl'

Client ID for the DHCP server.

#define ALP_CNC_PARAMETER_DHCP_HOST_NAME 'DHhn'

Host name for the DHCP server.

#define ALP_CNC_PARAMETER_DHCP_POOL_SIZE 'PSiz'

If DHCP=1, define the size of the address pool used by the DHCP server (default 16).

#define ALP_CNC_PARAMETER_DISCONNECTION_TIMEMOUT 'DisT'

Default Disconnection timeout in seconds.

#define ALP_CNC_PARAMETER_DNS_SERVERS 'DNSs'

DNS servers.

#define ALP_CNC_PARAMETER_DOMAINS 'Doms'

Bind search domain names.

#define ALP_CNC_PARAMETER_ENABLE_DHCP 'DHCP'

IPIFIN parameter: Enable DHCP (default) or use ZeroConf (zcip).

#define ALP_CNC_PARAMETER_ENCRYPTION_MODE 'EMod'

Encryption mode for the connection (specific use for VPN).

#define ALP_CNC_PARAMETER_EXTRA_OPTIONS 'XOpt'

Extra options for the plugin.

#define ALP_CNC_PARAMETER_FLOW_CONTROL 'FCtl'

Flow control on device.

#define ALP_CNC_PARAMETER_GATEWAY 'GaWy'

Gateway.

#define ALP_CNC_PARAMETER_GROUP_NAME 'GrpN'

CISCO Goup Name for pre-shared key.

#define ALP_CNC_PARAMETER_HCI_DEVICE '_Hci'

Used when the device has more than one BT device. In that case this parameter is used to define the BT device to use for the connection.

#define ALP_CNC_PARAMETER_HEX_PRESHARED_KEY 'HexK'

Is the preshared key in a hexadecimal format ?

#define ALP_CNC_PARAMETER_IDLE_TIMEOUT 'IdlT'

Time to wait before deconnecting when idle.

#define ALP_CNC_PARAMETER_INTERFACE_NAME 'DDev'

IF name.

#define ALP_CNC_PARAMETER_IP_FAMILY 'IPvs'

IPv4 or IPv6.

#define ALP_CNC_PARAMETER_IP_PROTOCOL 'Prot'

A protocol (ie TCP, UDP, ICMP...).

#define ALP_CNC_PARAMETER_LINK 'link'

link parameter (see ALP_CNC_CHANNEL_LINK_XXX constants)

#define ALP_CNC_PARAMETER_LINKED_PROFILE 'LPro'

The openned channel on the NetPeer profile.

#define ALP_CNC_PARAMETER_LLMNR 'LMNR'

To activate or desactivate LLMNR for the profile.

#define ALP_CNC_PARAMETER_LOCAL_IP 'LoIP'

local IP address

#define ALP_CNC_PARAMETER_LOCAL_IP_ADDRESSES 'LIPs'

List of IPv6 addresses to assign.

#define ALP_CNC_PARAMETER_METRIC 'Mtic'

IF metric.

#define ALP_CNC_PARAMETER_MTU '_MTU'

IF MTU.

#define ALP_CNC_PARAMETER_NO_DEFAULT_PPPD_ARGS 'NDPA'

0 for use the default arguments to start pppd, 1 for not

#define ALP_CNC_PARAMETER_NO_VPN_AUTH 'NoVA'

Are the username and the password managed by a lower plug-in instead of the VPN plug-in ?

#define ALP_CNC_PARAMETER_PARITY_BITS 'Prty'

Parity bits on device.

#define ALP_CNC_PARAMETER_PASSWORD 'Pass'

Password for authentification.

#define ALP_CNC_PARAMETER_PFS_MODE 'PFSe'

Perfect Forwarding Secrecy for IPSEC.

#define ALP_CNC_PARAMETER_PHONE_DRIVER 'PDrv'

Phone Plugin: Phone Driver parameter.

#define ALP_CNC_PARAMETER_PORT 'Port'

A port (ie for TCP, UDP).

#define ALP_CNC_PARAMETER_PPP_AUTHENTICATION_UI 'PAUI'

Is the authentication UI part of the PPP plug-in must be displayed ? (default: 0=no).

#define ALP_CNC_PARAMETER_PPP_DATA_COMP 'Datc'

PPP Plugin: Software compression (default: 1=on).

#define ALP_CNC_PARAMETER_PPP_HEADER_COMP 'Hdrc'

PPP Plugin: IP Header compression (default: 1=on).

#define ALP_CNC_PARAMETER_PRESHARED_KEY 'PShK'

Pre-shared key to use for connection (ie VPN).

#define ALP_CNC_PARAMETER_PXLOGICAL_AUTH_ID 'PAId'

Logical authentication Id.

#define ALP_CNC_PARAMETER_PXLOGICAL_AUTH_PW 'PAPw'

Logical authentication password.

#define ALP_CNC_PARAMETER_PXLOGICAL_AUTH_TYPE 'PAut'

Logical proxy authentication type.

#define ALP_CNC_PARAMETER_PXLOGICAL_NAME 'PNam'

Logical proxy name.

#define ALP_CNC_PARAMETER_PXLOGICAL_NO_PROXY_FOR 'PNoP'

No Proxy for field.

#define ALP_CNC_PARAMETER_PXLOGICAL_START_PAGE 'PPag'

Logical proxy start page.

#define ALP_CNC_PARAMETER_PXPHYSICAL_ADDRESS 'PAdr'

Physical proxy address.

#define ALP_CNC_PARAMETER_PXPHYSICAL_ADDRESS_TYPE 'PAdt'

Physical proxy address type.

#define ALP_CNC_PARAMETER_PXPHYSICAL_PORT 'PPrt'

Physical proxy port number.

#define ALP_CNC_PARAMETER_REMOTE_HOST 'ReHt'

Remote Host domain name or IP address(ie the VPN server).

#define ALP_CNC_PARAMETER_REMOTE_IP 'ReIP'

remote IP address for point-to-point links

#define ALP_CNC_PARAMETER_SCRIPT_FILE 'LogF'

File path of the login script.

#define ALP_CNC_PARAMETER_SECURITY '_Sec'

Security parameter for Bluetooth connection. (0 = none, 1 = authenticate, 2 = encrypt, 3 = secure).

#define ALP_CNC_PARAMETER_SERVICE 'srv0'

service parameter (see ALP_CNC_CHANNEL_SRV_XXX constants)

#define ALP_CNC_PARAMETER_SERVICE_NAME 'Topo'

Topology of the bluetooth network i.e. PANU, GN or NAP.

#define ALP_CNC_PARAMETER_SERVICE_REQUESTED 'srvR'

service requested parameter (see ALP_CNC_CHANNEL_SRV_XXX constants)

#define ALP_CNC_PARAMETER_STOP_BITS 'Stop'

Stop bits on device.

#define ALP_CNC_PARAMETER_TTL '_TTL'

TTL for tunneling.

#define ALP_CNC_PARAMETER_TUNNEL_PROFILE 'TPro'

ID of the profile that uses the connection profile to open a tunnel.

#define ALP_CNC_PARAMETER_UI_LOCKED 'Lock'

Is the plug-in UI is unable to edit when editing a profile with the plug-in ?

#define ALP_CNC_PARAMETER_UI_VISIBLE 'UIVi'

Is the plug-in UI is visible when editing a profile with the plug-in ?

#define ALP_CNC_PARAMETER_UNIQUE_SLAVE_IP 'USIP'

for NetIn profiles when PSiz=1, the unique possible IP for the slave device connected

#define ALP_CNC_PARAMETER_USED_PROFILE 'UPro'

ID of the used profile with the connection profile (ie VPN).

#define ALP_CNC_PARAMETER_USER_NAME 'User'

Username for authentification.

#define ALP_CNC_PARAMETER_WIFI_ADDRESS 'Addr'

WiFi: MAC address of the remote access point.

#define ALP_CNC_PARAMETER_WIFI_ENCRYPTION 'WEnc'

WiFi: see ALP_WIFI_SECURITY_MODE_XXX.

#define ALP_CNC_PARAMETER_WIFI_ESSID 'Ssid'

WiFi: ESSID of the network.

#define ALP_CNC_PARAMETER_WIFI_LAST_CONNECTION 'Last'

WiFi: Last connection of the network.

#define ALP_CNC_PARAMETER_WIFI_NETWORK_ID 'NWID'

WiFi: ID of the connected favorite network.

#define ALP_CNC_PARAMETER_WIFI_RADIO_MODE 'Rdio'

WiFi: Radio mode: Infrastructure, Ad-Hoc, Hidden...

#define ALP_CNC_PARAMETER_X509_CERTIFICATE 'Cert'

ID of the X509 certificate to use for the connection (ie VPN).

#define ALP_CNC_PHONE_PLUGIN_NAME "Phone"

Phone Cnc plugin: Manage connection with Phone devices.

#define ALP_CNC_PPP_PLUGIN_NAME "PPP"

PPP Cnc plugin: Manage PPP connections.

#define ALP_CNC_SERIAL_PLUGIN_NAME "Serial"

PPP Cnc plugin: Manage Serial devices.

#define ALP_CNC_TUN_IP_PLUGIN_NAME "TunIP"

Tunnel IP plug-in: Manage IP tunneling like IPv6-in-IPv4.

#define ALP_CNC_VP_TCP_PLUGIN_NAME "VP_TCP"

VP_TCP plugin: Manage TCP connection with VirtualPhone.

#define ALP_CNC_VPN_PLUGIN_NAME "VPN"

IPSEC Cnc plugin: Manage VPN connections.

#define ALP_CNC_WIFI_NETWORKS_NAME "NetWifi"

Anchor for Wifi cached networks.

#define ALP_CNC_WIFI_PLUGIN_NAME "Wifi"

WIFI Cnc plugin: Manage wifi devices.

Generated on Wed Jul 30 07:06:42 2008 by Doxygen 1.4.6 for ALP SDK + Hiker Documentation


Plugins list
#define	ALP_CNC_BLUETOOTH_IN_PLUGIN_NAME "BluetoothIn"
	Bluetooth Cnc plugin for input connections.
#define	ALP_CNC_BLUETOOTH_PLUGIN_NAME "BluetoothOut"
	Bluetooth Cnc plugin: Manage Bluetooth devices.
#define	ALP_CNC_BLUETOOTH_SERIAL_PLUGIN_NAME "BluetoothSPP"
	Bluetooth Cnc plugin: Manage Bluetooth Serial devices.
#define	ALP_CNC_DATA_CALL_PLUGIN_NAME "DataCall"
	Data Call Cnc plugin: Manage data connection with Phone devices.
#define	ALP_CNC_ETHERNET_PLUGIN_NAME "Ethernet"
	Ethernet Cnc plugin: Manage Ethernet devices.
#define	ALP_CNC_IPIF_IN_PLUGIN_NAME "IPIFIN"
	IPIFIN plug-in: manage IP incoming connections.
#define	ALP_CNC_IPIF_PLUGIN_NAME "IPIF"
	IPIF Cnc plugin: Manage network configuration (IP interfaces).
#define	ALP_CNC_IPSEC_PLUGIN_NAME "IPSEC"
	IPSEC Cnc plugin: Manage IPSEC connections.
#define	ALP_CNC_L2TP_PLUGIN_NAME "L2TP"
	L2TP Cnc plugin: Manage L2TP connections.
#define	ALP_CNC_NET_ACCESS_PLUGIN_NAME "NetAccess"
	Net Access plug-in:.
#define	ALP_CNC_NET_IN_INTERFACE "NetIn"
	Anchor for NetIn profiles.
#define	ALP_CNC_NET_OUT_INTERFACE "NetOut"
	The various "anchoring points" in the networking Cnc graph.
#define	ALP_CNC_NET_OUTGOING_SEARCH_STRING ALP_CNC_NET_OUT_INTERFACE"/*"
	Netout search string.
#define	ALP_CNC_NET_PEER_PLUGIN_NAME "NetPeer"
	NetPeer plug-in: manage connections over NetIn profiles.
#define	ALP_CNC_NO_IPV6_OBJECT "NoIPv6"
	IPv6 object.
#define	ALP_CNC_OMAP_CSMI_PLUGIN_NAME "OmapCsmi"
	OMAP CSMI Cnc plugin: Manage data connection with Phone devices.
#define	ALP_CNC_PHONE_PLUGIN_NAME "Phone"
	Phone Cnc plugin: Manage connection with Phone devices.
#define	ALP_CNC_PPP_PLUGIN_NAME "PPP"
	PPP Cnc plugin: Manage PPP connections.
#define	ALP_CNC_SERIAL_PLUGIN_NAME "Serial"
	PPP Cnc plugin: Manage Serial devices.
#define	ALP_CNC_TUN_IP_PLUGIN_NAME "TunIP"
	Tunnel IP plug-in: Manage IP tunneling like IPv6-in-IPv4.
#define	ALP_CNC_VP_TCP_PLUGIN_NAME "VP_TCP"
	VP_TCP plugin: Manage TCP connection with VirtualPhone.
#define	ALP_CNC_VPN_PLUGIN_NAME "VPN"
	IPSEC Cnc plugin: Manage VPN connections.
#define	ALP_CNC_WIFI_NETWORKS_NAME "NetWifi"
	Anchor for Wifi cached networks.
#define	ALP_CNC_WIFI_PLUGIN_NAME "Wifi"
	WIFI Cnc plugin: Manage wifi devices.
Parameters list
#define	ALP_CNC_DEFAULT_DISCONNECTION_TIMEMOUT ((time_t) 600)
	Default disconnection timeout value.
#define	ALP_CNC_PARAMETER_AGGRESSIVE_MODE 'Aggr'
	Aggresive mode for IPSEC.
#define	ALP_CNC_PARAMETER_APPLICATION_DISCONNECTION_TIMEMOUT 'ADsT'
	Application Disconnection timeout in seconds (used when an app disconnects with the ALP_CNC_DISCONNECT_WITH_TIMEOUT flag).
#define	ALP_CNC_PARAMETER_ASSOCIATED_PROFILE 'APro'
	Associated NetPeer profile with a NetIn profile.
#define	ALP_CNC_PARAMETER_AUTHENTIFICATION_MODE 'Auth'
	Authentication mode: PAP, CHAP,...
#define	ALP_CNC_PARAMETER_AUTO_PROFILE 'auto'
	Set to 0 to avoid auto connection/disconnection feature on the profile.
#define	ALP_CNC_PARAMETER_BAUD_RATE 'Baud'
	Speed on serial device.
#define	ALP_CNC_PARAMETER_BINDED_NETWORKS 'BNts'
	Networks binded to the profile.
#define	ALP_CNC_PARAMETER_BLUETOOTH_ADDRESS 'Addr'
	Bluetooth address of the remote device to connection.
#define	ALP_CNC_PARAMETER_BOUND_PROFILE 'CPro'
	Profilename of the bound profile with the connection profile (ie VPN).
#define	ALP_CNC_PARAMETER_CHECK_CABLE 'Cabl'
	1 to check, 0 to not check if the cable is present
#define	ALP_CNC_PARAMETER_CISCO_COMPATIBILITY_MODE 'CisM'
	CISCO Compatibility Mode.
#define	ALP_CNC_PARAMETER_CNC_PURPOSE 'CncP'
	Phone Plugin: Connection purpose: Server or Transport.
#define	ALP_CNC_PARAMETER_CNC_TYPE 'CncT'
	Phone Plugin: Connection type we want to open: AT command, CSD data call...
#define	ALP_CNC_PARAMETER_CONFIGURATION_MODE 'Mode'
	DHCP, Static, Zero Conf...
#define	ALP_CNC_PARAMETER_CONNECTION_DELAY 'Dlay'
	Time to wait before continuing connection process (in second).
#define	ALP_CNC_PARAMETER_CONNECTION_MODE 'CMod'
	Connection Mode for NetAcces.
#define	ALP_CNC_PARAMETER_CONNECTION_PEER 'CoPe'
	0 to not allowed NetOut profile over this NetIn profile, 1 for yes
#define	ALP_CNC_PARAMETER_CONNECTION_SHARING 'CoSh'
	0 to not share a connection within the NetIn profile, 1 for yes
#define	ALP_CNC_PARAMETER_CONNECTION_TIMEOUT 'ConT'
	Time allowed for connection.
#define	ALP_CNC_PARAMETER_DATA_BITS 'Bits'
	Data bits on device.
#define	ALP_CNC_PARAMETER_DATA_CALL_CS_BEARER_CNC_ELEM 'BCEl'
	Data Call Plugin: CS bearer cnc element.
#define	ALP_CNC_PARAMETER_DATA_CALL_CS_BEARER_SERVICE 'BSrv'
	Data Call Plugin: CS bearer service.
#define	ALP_CNC_PARAMETER_DATA_CALL_CS_BEARER_SPEED 'BSpd'
	Data Call Plugin: CS bearer speed.
#define	ALP_CNC_PARAMETER_DATA_CALL_CS_DIAL_NUMBER 'Dial'
	Data Call Plugin: CS Dial number.
#define	ALP_CNC_PARAMETER_DATA_CALL_PS_APN 'Apna'
	Data Call Plugin: PS access point name.
#define	ALP_CNC_PARAMETER_DATA_CALL_PS_DATA_COMP 'Datc'
	Data Call Plugin: PS data compression.
#define	ALP_CNC_PARAMETER_DATA_CALL_PS_HEADER_COMP 'Hdrc'
	Data Call Plugin: PS header compression.
#define	ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_DELAY 'Dela'
	Data Call Plugin: PS QOS delay.
#define	ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_GTED_BITRATE_DL 'Gbrd'
	Data Call Plugin: PS QOS guaranted download bitrate.
#define	ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_GTED_BITRATE_UL 'Gbru'
	Data Call Plugin: PS QOS guaranted upload bitrate.
#define	ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_MAX_BITRATE_DL 'Mbrd'
	Data Call Plugin: PS QOS max download bitrate.
#define	ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_MAX_BITRATE_UL 'Mbru'
	Data Call Plugin: PS QOS max upload bitrate.
#define	ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_MEAN 'Mean'
	Data Call Plugin: PS QOS mean.
#define	ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_PEAK 'Peak'
	Data Call Plugin: PS QOS peak.
#define	ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_PRECEDENCE 'Prec'
	Data Call Plugin: PS QOS precedence.
#define	ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_RELIABILITY 'Reli'
	Data Call Plugin: PS QOS reliability.
#define	ALP_CNC_PARAMETER_DATA_CALL_PS_QOS_TRAFFIC_CLASS 'Trcl'
	Data Call Plugin: PS QOS traffic class.
#define	ALP_CNC_PARAMETER_DATA_CALL_TYPE 'Type'
	Data Call Plugin: Type of data call: CS or PS.
#define	ALP_CNC_PARAMETER_DEVICE_NAME 'DevN'
	Device name.
#define	ALP_CNC_PARAMETER_DHCP_CLIENT_ID 'DHcl'
	Client ID for the DHCP server.
#define	ALP_CNC_PARAMETER_DHCP_HOST_NAME 'DHhn'
	Host name for the DHCP server.
#define	ALP_CNC_PARAMETER_DHCP_POOL_SIZE 'PSiz'
	If DHCP=1, define the size of the address pool used by the DHCP server (default 16).
#define	ALP_CNC_PARAMETER_DISCONNECTION_TIMEMOUT 'DisT'
	Default Disconnection timeout in seconds.
#define	ALP_CNC_PARAMETER_DNS_SERVERS 'DNSs'
	DNS servers.
#define	ALP_CNC_PARAMETER_DOMAINS 'Doms'
	Bind search domain names.
#define	ALP_CNC_PARAMETER_ENABLE_DHCP 'DHCP'
	IPIFIN parameter: Enable DHCP (default) or use ZeroConf (zcip).
#define	ALP_CNC_PARAMETER_ENCRYPTION_MODE 'EMod'
	Encryption mode for the connection (specific use for VPN).
#define	ALP_CNC_PARAMETER_EXTRA_OPTIONS 'XOpt'
	Extra options for the plugin.
#define	ALP_CNC_PARAMETER_FLOW_CONTROL 'FCtl'
	Flow control on device.
#define	ALP_CNC_PARAMETER_GATEWAY 'GaWy'
	Gateway.
#define	ALP_CNC_PARAMETER_GROUP_NAME 'GrpN'
	CISCO Goup Name for pre-shared key.
#define	ALP_CNC_PARAMETER_HCI_DEVICE '_Hci'
	Used when the device has more than one BT device. In that case this parameter is used to define the BT device to use for the connection.
#define	ALP_CNC_PARAMETER_HEX_PRESHARED_KEY 'HexK'
	Is the preshared key in a hexadecimal format ?
#define	ALP_CNC_PARAMETER_IDLE_TIMEOUT 'IdlT'
	Time to wait before deconnecting when idle.
#define	ALP_CNC_PARAMETER_INTERFACE_NAME 'DDev'
	IF name.
#define	ALP_CNC_PARAMETER_IP_FAMILY 'IPvs'
	IPv4 or IPv6.
#define	ALP_CNC_PARAMETER_IP_PROTOCOL 'Prot'
	A protocol (ie TCP, UDP, ICMP...).
#define	ALP_CNC_PARAMETER_LINK 'link'
	link parameter (see ALP_CNC_CHANNEL_LINK_XXX constants)
#define	ALP_CNC_PARAMETER_LINKED_PROFILE 'LPro'
	The openned channel on the NetPeer profile.
#define	ALP_CNC_PARAMETER_LLMNR 'LMNR'
	To activate or desactivate LLMNR for the profile.
#define	ALP_CNC_PARAMETER_LOCAL_IP 'LoIP'
	local IP address
#define	ALP_CNC_PARAMETER_LOCAL_IP_ADDRESSES 'LIPs'
	List of IPv6 addresses to assign.
#define	ALP_CNC_PARAMETER_METRIC 'Mtic'
	IF metric.
#define	ALP_CNC_PARAMETER_MTU '_MTU'
	IF MTU.
#define	ALP_CNC_PARAMETER_NO_DEFAULT_PPPD_ARGS 'NDPA'
	0 for use the default arguments to start pppd, 1 for not
#define	ALP_CNC_PARAMETER_NO_VPN_AUTH 'NoVA'
	Are the username and the password managed by a lower plug-in instead of the VPN plug-in ?
#define	ALP_CNC_PARAMETER_PARITY_BITS 'Prty'
	Parity bits on device.
#define	ALP_CNC_PARAMETER_PASSWORD 'Pass'
	Password for authentification.
#define	ALP_CNC_PARAMETER_PFS_MODE 'PFSe'
	Perfect Forwarding Secrecy for IPSEC.
#define	ALP_CNC_PARAMETER_PHONE_DRIVER 'PDrv'
	Phone Plugin: Phone Driver parameter.
#define	ALP_CNC_PARAMETER_PORT 'Port'
	A port (ie for TCP, UDP).
#define	ALP_CNC_PARAMETER_PPP_AUTHENTICATION_UI 'PAUI'
	Is the authentication UI part of the PPP plug-in must be displayed ? (default: 0=no).
#define	ALP_CNC_PARAMETER_PPP_DATA_COMP 'Datc'
	PPP Plugin: Software compression (default: 1=on).
#define	ALP_CNC_PARAMETER_PPP_HEADER_COMP 'Hdrc'
	PPP Plugin: IP Header compression (default: 1=on).
#define	ALP_CNC_PARAMETER_PRESHARED_KEY 'PShK'
	Pre-shared key to use for connection (ie VPN).
#define	ALP_CNC_PARAMETER_PXLOGICAL_AUTH_ID 'PAId'
	Logical authentication Id.
#define	ALP_CNC_PARAMETER_PXLOGICAL_AUTH_PW 'PAPw'
	Logical authentication password.
#define	ALP_CNC_PARAMETER_PXLOGICAL_AUTH_TYPE 'PAut'
	Logical proxy authentication type.
#define	ALP_CNC_PARAMETER_PXLOGICAL_NAME 'PNam'
	Logical proxy name.
#define	ALP_CNC_PARAMETER_PXLOGICAL_NO_PROXY_FOR 'PNoP'
	No Proxy for field.
#define	ALP_CNC_PARAMETER_PXLOGICAL_START_PAGE 'PPag'
	Logical proxy start page.
#define	ALP_CNC_PARAMETER_PXPHYSICAL_ADDRESS 'PAdr'
	Physical proxy address.
#define	ALP_CNC_PARAMETER_PXPHYSICAL_ADDRESS_TYPE 'PAdt'
	Physical proxy address type.
#define	ALP_CNC_PARAMETER_PXPHYSICAL_PORT 'PPrt'
	Physical proxy port number.
#define	ALP_CNC_PARAMETER_REMOTE_HOST 'ReHt'
	Remote Host domain name or IP address(ie the VPN server).
#define	ALP_CNC_PARAMETER_REMOTE_IP 'ReIP'
	remote IP address for point-to-point links
#define	ALP_CNC_PARAMETER_SCRIPT_FILE 'LogF'
	File path of the login script.
#define	ALP_CNC_PARAMETER_SECURITY '_Sec'
	Security parameter for Bluetooth connection. (0 = none, 1 = authenticate, 2 = encrypt, 3 = secure).
#define	ALP_CNC_PARAMETER_SERVICE 'srv0'
	service parameter (see ALP_CNC_CHANNEL_SRV_XXX constants)
#define	ALP_CNC_PARAMETER_SERVICE_NAME 'Topo'
	Topology of the bluetooth network i.e. PANU, GN or NAP.
#define	ALP_CNC_PARAMETER_SERVICE_REQUESTED 'srvR'
	service requested parameter (see ALP_CNC_CHANNEL_SRV_XXX constants)
#define	ALP_CNC_PARAMETER_STOP_BITS 'Stop'
	Stop bits on device.
#define	ALP_CNC_PARAMETER_TTL '_TTL'
	TTL for tunneling.
#define	ALP_CNC_PARAMETER_TUNNEL_PROFILE 'TPro'
	ID of the profile that uses the connection profile to open a tunnel.
#define	ALP_CNC_PARAMETER_UI_LOCKED 'Lock'
	Is the plug-in UI is unable to edit when editing a profile with the plug-in ?
#define	ALP_CNC_PARAMETER_UI_VISIBLE 'UIVi'
	Is the plug-in UI is visible when editing a profile with the plug-in ?
#define	ALP_CNC_PARAMETER_UNIQUE_SLAVE_IP 'USIP'
	for NetIn profiles when PSiz=1, the unique possible IP for the slave device connected
#define	ALP_CNC_PARAMETER_USED_PROFILE 'UPro'
	ID of the used profile with the connection profile (ie VPN).
#define	ALP_CNC_PARAMETER_USER_NAME 'User'
	Username for authentification.
#define	ALP_CNC_PARAMETER_WIFI_ADDRESS 'Addr'
	WiFi: MAC address of the remote access point.
#define	ALP_CNC_PARAMETER_WIFI_ENCRYPTION 'WEnc'
	WiFi: see ALP_WIFI_SECURITY_MODE_XXX.
#define	ALP_CNC_PARAMETER_WIFI_ESSID 'Ssid'
	WiFi: ESSID of the network.
#define	ALP_CNC_PARAMETER_WIFI_LAST_CONNECTION 'Last'
	WiFi: Last connection of the network.
#define	ALP_CNC_PARAMETER_WIFI_NETWORK_ID 'NWID'
	WiFi: ID of the connected favorite network.
#define	ALP_CNC_PARAMETER_WIFI_RADIO_MODE 'Rdio'
	WiFi: Radio mode: Infrastructure, Ad-Hoc, Hidden...
#define	ALP_CNC_PARAMETER_X509_CERTIFICATE 'Cert'
	ID of the X509 certificate to use for the connection (ie VPN).

Profile configuration [Connection Manager]

Detailed Description

Plugins list

Parameters list

Define Documentation

Profile configuration
[Connection Manager]