Hi,
I want to connect to a server application run under ALP Simulator, and the client application is a Win32 application (in the Windows XP that runs the ALPSDK VMWare)

Win XP uses 192.168.145.xxx
Ubuntu uses 192.168.145.xxx (br0) and 192.168.3.xxx (tap0)

Is there a combination of the options :
* Create host network bridge
* Enable NAT
* Keep host network bridge
that would let Win XP connect to the ALP Simulator ?

Thanks

With the following settings in ACCESS Simulator Options, it is almost perfect:
[x] Create host network bridge
[ ] Enable NAT
[ ] Keep host network bridge
eth1 is set up with the correct parameters (DHCP on the local network, ...)

From another computer, I can connect to a TCP/IP application running on the Simulator

However, 2 things randomly work bad:

* Message "ACCESS Simulator Error" "Unable to lauch target" "Check for correct target configuration" ; I click [OK] and it runs anyway, but Simulator Menu is not accessible (e.g. Action / Telnet to target is gray)

* When exiting the simulator, the eth1 looses its IP adress. I found this workaround, but if someone has a better idea :
1) ifconfig eth1 down
2) ifconfig eth1 up
3) if config -> now eth1 is OK

Thanks for any advice.

Hi,

I'm currently having a similar issue. However, it happens all the time for me.

I'm running Ubuntu 8.04 , AMD64.

When I start the simulator it says:
"Please wait while the target launches."

After a while, this fails and says:
"Unable to launch target. Check for correct target configuration."

Do I need to be connected to the internet for this to work correctly?
I'm connected to the internet via a linksys wireless usb card (wlan0), and I am not using my ethernet port (eth0).

Someone please help.